FlexLine

speedyFlex PlateCleaner

Thorough and gentle cleaning of flexo printing plates

Technical description

The speedyFlexPlateCleaner completey made of stainless steel, equipped with cleaning media reservoir 40 litres and water reservoir 30 litres, with filling level sensor and filter. Lid with inspection window, automatic input conveyor 1500mm long.

The adoption of the upper transport rollers covered with a special sponge makes the cliché transport extremely smooth and without any friction. Further to this, bottom stainless steel guides of new design, eliminate all cliché jam possibility. New washing detergent pump and new rinsing water pump, horizontally located on a shelf inside the machine, but externally to the detergent and the water reservoirs.

Cleaning process

The first phase of the cleaning process foresees the passage of the cliché through the washing tank where the action of a chemical detergent combined with the action of 3 mechanical brushes (the first and the third one, rotating brushes; the second one, power traverse brush) wash out the ink on the upper side of the cliché.

After a squeezing action, the cliché is dried with hot air. The liquid reservoirs are located in a sliding drawer, allowing easy and quick intervention. The liquid circulation is carried up with a closed loop circuit.

The good repeatability of the quality of the reprint is essential for flexographic printing, as well as reduction of down time of the presses.

RENZMANN AniFlexCleaner is a reliable product with low maintenance effort. It is made to remove all ink types. Short washing cycles and very thorough cleaning ensure clean flexo printing plates for reuse. The unit is easy to operate and equipped with the last generation electronic system with touch screen display.

RENZMANN speedyFlexPlateCleaner: designed to grant a perfect cleaning of flexo plates without damaging any part of it.

AniFlexCleaner

Thorough and gentle cleaning of anilox rollers and sleeves

Technical description

Unit is made of stainless steel, equipped with sliding drawer for storage of cleaning agent. Carriage moving spraying nozzle and blower assembled on soft gliding guide. Magnetic sensors to determine carriage travel, easy use and simple manual adjusting. Machine equipped with several safety controls. Washing cycle will not start if minimum level in detergent reservoir is fallen short of. Then, cleaner has to be added to start again.

Cleaning process

  • Washing, heated cleaner to be sprayed onto rollers, detergent downflow
  • Rinsing, 140 bar high pressure water, coming from the tap
  • Drying by compressed air, first step drying of lid inside, second drying of anilox roller

The good repeatability of the quality of the reprint is essential for flexographic printing, as well as reduction of down time of the presses.

RENZMANN AniFlexCleaner is a reliable product with low maintenance effort. It is made to remove all ink types. Short washing cycles and very thorough cleaning ensure clean anilox rollers and sleeves for reuse. The unit is easy to operate and equipped with the last generation electronic system with touch screen display.

RENZMANN AniFlexCleaner: designed to grant a perfect cleaning of rollers and sleeves without damaging any part of it.

Request More Information

Agencies worldwide

Agencies worldwide

Product Images

Typ FlexPlateCleaner
Typ FlexPlateCleaner
AniFlexCleaner
AniFlexCleaner
Hinweis
Bitte senden Sie Bewerbungen an:
bewerbung@dw-renzmann.de